制造商: NXP
产品种类: CAN 接口集成电路
RoHS: 详细信息
类型: High Speed
安装风格: SMD/SMT
封装 / 箱体: SOIC-8
数据速率: 1 Mb/s
激励器数量: 1 Driver
接收机数量: 1 Receiver
电源电压-最小: 4.5 V
电源电压-最大: 5.5 V
最小工作温度: - 40 C
最大工作温度: + 125 C
工作电源电流: 70 mA
ESD 保护: 2 kV
封装: Reel
封装: Cut Tape
封装: MouseReel
商标: NXP Semiconductors
双工: Half Duplex
收发器数量: 1 Transceiver
工作电源电压: 5 V
产品: CAN Controllers
产品类型: CAN Interface IC
1000
子类别: Interface ICs
零件号别名: 935288883115
单位重量: 73.065 mg
1. General description The PCA82C250 is the interface between a CAN protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. 2. Features and benefits Fully compatible with the “ISO 11898” standard High speed (up to 1 MBd) Bus lines protected against transients in an automotive environment Slope control to reduce Radio Frequency Interference (RFI) Differential receiver with wide common-mode range for high immunity against ElectroMagnetic Interference (EMI) Thermally protected Short-circuit proof to battery and ground Low-current Standby mode An unpowered node does not disturb the bus lines At least 110 nodes can be connected