天天IC网> 企业新闻

ON/安森美 MC33161DR2G 监控电路 SOP8 全新原装 价格优势

时间:2023-06-25 11:20发布企业:深圳和润天下电子科技有限公司
联系人:蔡经理,张小姐电话:13378422395Q Q:
制造商: onsemi 
产品种类: 监控电路 
RoHS:  详细信息 
类型: Voltage Monitors 
安装风格: SMD/SMT 
封装 / 箱体: SOIC-8 
阈值电压: 1.27 V 
被监测输入数: 2 Input 
输出类型: Open Collector / Drain 
人工复位: No Manual Reset 
看门狗计时器: No Watchdog 
电池备用开关: No Backup 
电源电压-最大: 40 V 
最小工作温度: - 40 C 
最大工作温度: + 105 C 
系列: MC33161 
封装: Reel 
封装: Cut Tape 
封装: MouseReel 
商标: onsemi 
特点: Internal Hysteresis 
高度: 1.5 mm 
长度: 5 mm 
工作电源电流: 560 uA 
过电压阈值: Adjustable 
Pd-功率耗散: 450 mW 
产品类型: Supervisory Circuits 
2500 
子类别: PMIC - Power Management ICs 
电源电压-最小: 2 V 
欠电压阈值: Adjustable 
宽度: 4 mm 
单位重量: 540 mg
The MC34161/MC33161 are universal voltage monitors intended
for use in a wide variety of voltage sensing applications. These devices
offer the circuit designer an economical solution for positive and
negative voltage detection. The circuit consists of two comparator
channels each with hysteresis, a unique Mode Select Input for channel
programming, a pinned out 2.54 V reference, and two open collector
outputs capable of sinking in excess of 10 mA. Each comparator
channel can be configured as either inverting or noninverting by the
Mode Select Input. This allows over, under, and window detection of
positive and negative voltages. The minimum supply voltage needed
for these devices to be fully functional is 2.0 V for positive voltage
sensing and 4.0 V for negative voltage sensing.
Applications include direct monitoring of positive and negative
voltages used in appliance, automotive, consumer, and industrial
equipment.
Features
• Unique Mode Select Input Allows Channel Programming
• Over, Under, and Window Voltage Detection
• Positive and Negative Voltage Detection
• Fully Functional at 2.0 V for Positive Voltage Sensing and 4.0 V
for Negative Voltage Sensing
• Pinned Out 2.54 V Reference with Current Limit Protection
• Low Standby Current
• Open Collector Outputs for Enhanced Device Flexibility
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant