天天IC网> 企业新闻

VISHAY/威世 DG2735DN-T1-E4 模拟开关 IC 封装QFN-10 原装现货 价格优势

时间:2023-07-21 15:09发布企业:深圳和润天下电子科技有限公司
联系人:蔡经理,张小姐电话:13378422395Q Q:

制造商: Vishay 
产品种类: 模拟开关 IC 
RoHS:  详细信息 
安装风格: SMD/SMT 
封装 / 箱体: QFN-10 
通道数量: 2 Channel 
配置: 2 x SPDT 
导通电阻—最大值: 500 mOhms 
电源电压-最小: 1.65 V 
电源电压-最大: 4.3 V 
运行时间—最大值: 78 ns 
空闲时间—最大值: 58 ns 
最小工作温度: - 40 C 
最大工作温度: + 85 C 
系列: DG 
封装: Reel 
封装: Cut Tape 
封装: MouseReel 
商标: Vishay / Siliconix 
高度: 0.55 mm (Max) 
长度: 1.8 mm 
Pd-功率耗散: 208 mW 
产品类型: Analog Switch ICs 
3000 
子类别: Switch ICs 
电源电流—最大值: 1 uA 
电源类型: Single Supply 
开关直流: 250 mA 
宽度: 1.4 mm 
零件号别名: DG2735DN-E4 
单位重量: 7 mg

The DG2735, DG2736 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed for high performance switching of analog signals. Combining low-power, high speed, low on-resistance, and small package size, the DG2735, DG2736 are ideal for portable and battery power applications. The DG2735, DG2736 have an operation range from 1.65 V to 4.3 V single supply. The DG2735 has two separate control pins with for the separated two SPDT switched. The DG2736 has an EN pin. All switches are at high impedance mode when the EN is high. The DG2735, DG2736 are guaranteed 1.65 V logic compatible, allowing the easy interface with low voltage DSP or MCU control logic and ideal for one cell Li-ion battery direct power. The switch conducts signals within power rails equally well in both directions when on, and blocks up to the power supply level when off. Break-before-make is guaranteed. The DG2735, DG2736 are built on Vishay Siliconix’s sub micron CMOS low voltage process technology and provides greater than 300 mA latch-up protection, as tested per JESD78. As a committed partner to the community and the environment, Vishay Siliconix manufactures this product with lead (Pb)-free device terminations. DG2735, DG2736 are offered in a miniQFN package. The miniQFN package has a nickel-palladium-gold device termination and is represented by the lead (Pb)-free “-E4” suffix. The nickel-palladium-gold device terminations meet all JEDEC standards for reflow and MSL ratings.