制造商: onsemi
产品种类: 低压差稳压器
RoHS: 详细信息
安装风格: Through Hole
封装 / 箱体: TO-92-3
输出电压: 3.3 V
输出电流: 100 mA
输出端数量: 1 Output
极性: Positive
静态电流: 75 uA
输入电压(最小值): 2 V
输入电压(最大值): 30 V
输出类型: Fixed
最小工作温度: - 40 C
最大工作温度: + 125 C
回动电压: 30 mV
系列: LP2950
封装: Bulk
商标: onsemi
回动电压—最大值: 80 mV at 100 uA
高度: 5.33 mm
Ib - 输入偏流: 75 uA
长度: 5.2 mm
线路调整率: 0.1 %
负载调节: 0.1 %
产品类型: LDO Voltage Regulators
参考电压: 1.25 V
2000
子类别: PMIC - Power Management ICs
电压调节准确度: 0.5 %
宽度: 4.19 mm
单位重量: 453.600 mg
The LP2950 and LP2951 are micropower voltage regulators that are specifically designed to maintain proper regulation with an extremely low input−to−output voltage differential. These devices feature a very low quiescent bias current of 75 A and are capable of supplying output currents in excess of 100 mA. Internal current and thermal limiting protection is provided. The LP2951 has three additional features. The first is the Error Output that can be used to signal external circuitry of an out of regulation condition, or as a microprocessor power−on reset. The second feature allows the output voltage to be preset to 5.0 V, 3.3 V or 3.0 V output (depending on the version) or programmed from 1.25 V to 29 V. It consists of a pinned out resistor divider along with direct access to the Error Amplifier feedback input. The third feature is a Shutdown input that allows a logic level signal to turn−off or turn−on the regulator output. Due to the low input−to−output voltage differential and bias current specifications, these devices are ideally suited for battery powered computer, consumer, and industrial equipment where an extension of useful battery life is desirable. The LP2950 is available in the three pin case 29 and DPAK packages, and the LP2951 is available in the eight pin dual−in−line, SOIC−8 and Micro8 surface mount packages. The ‘A’ suffix devices feature an initial output voltage tolerance ±0.5%