天天IC网> 企业新闻

STM8AF6289TCY 全新原装正品 100%原装进口正品 欢迎来电咨询!!

时间:2024-02-26 09:12发布企业:深圳市斌腾达科技有限公司
联系人:赵小姐电话:13049883113Q Q:

STM8AF6289TCY 全新原装正品 100%原装进口正品 欢迎来电咨询!!

Automotive 8-bit MCU, with up to 128 Kbyte Flash, data EEPROM,10-bit ADC, timers, LIN, CAN, USART, SPI, I2C, 3 to 5.5 V

Features• AEC-Q10x qualified• Core– Max fCPU: 24 MHz– Advanced STM8A core with Harvardarchitecture and 3-stage pipeline– Average 1.6 cycles/instruction resulting in10 MIPS at 16 MHz fCPU for industrystandard benchmark• Memories– Program memory: 32 to 128 Kbyte Flashprogram; data retention 20 years at 55 °C– Data memory: up to 2 Kbyte true dataEEPROM; endurance 300 kcycle– RAM: 6 Kbyte• Clock management– Low-power crystal resonator oscillator withexternal clock input– Internal, user-trimmable 16 MHz RC andlow-power 128 kHz RC oscillators– Clock security system with clock monitor• Reset and supply management– Wait/auto-wakeup/Halt low-power modeswith user definable clock gating– Low consumption power-on and powerdown reset• Interrupt management– Nested interrupt controller with 32 vectors– Up to 37 external interrupts on 5 vectors• Timers– 2 general purpose 16-bit timers with up to 3CAPCOM channels each (IC, OC, PWM)– Advanced control timer: 16-bit, 4 CAPCOMchannels, 3 complementary outputs, deadtime insertion and flexible synchronization– 8-bit AR basic timer with 8-bit prescaler– Auto-wakeup timer– Window and independent watchdog timers• I/Os– Up to 68 user pins (11 high sink I/Os)– Highly robust I/O design, immune againstcurrent injection• Communication interfaces– High speed 1 Mbit/s CAN 2.0B interface– USART with clock output for synchronousoperation - LIN master mode– LINUART LIN 2.2 compliant, master/slavemodes with automatic resynchronization– SPI interface up to 10 Mbit/s or fMASTER/2– I2C interface up to 400 Kbit/s• Analog to digital converter (ADC)– 10-bit resolution, 2 LSB TUE, 1 LSBlinearity and up to 16 multiplexed channels• Operating temperature up to 150 °C• Qualification conforms to AEC-Q100 grade 0Table 1. Device summary(1)1. In the order code, ‘F’ applies to devices with Flashprogram memory and data EEPROM. ‘F’ is replacedby ‘P’ for devices with FASTROM (see Table 2,